Beste Beratung und Service mit Laden in Goldau auf 360m² BEI FRAGEN: ANT@ANT.CH ODER 079 341 78 88

Naish Hoover Foil Package Ready to go!

Fr. 3'999.00 * Fr. 5'690.00 * (29.72% gespart)

inkl. MwSt. zzgl. Versandkosten
ab 1000.- Bestellung portofreie Lieferung

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Windsurfboard Volumen:

Rigg Grösse:

Rigg Farbe:

  • SW10866
Naish Hoover Foil Package HOVER WINDSURF 122-142 Dedicated Windsurf Foiling Designed... mehr
Produktinformationen "Naish Hoover Foil Package Ready to go!"

Naish Hoover Foil Package

HOVER WINDSURF 122-142
Dedicated Windsurf Foiling

Designed specifically for windsurf foiling, the Hover 122 and 142 boards feature a flat rocker which plane easily in light winds. Their short, parallel outlines provide plenty of volume and stability for easy and stable uphaul. Complimenting their flat rocker, the bottom channel in their tail is strategically positioned to perfect the foil’s angle of attack and generate just enough lift in the nose to guard against pearling.

For a customized experience, our track system allows riders to fine-tune the foil position to fit their size and ability: adjusting the foil in a more forward position suits heavier, or more inexperienced foilers, while positioning the foil further back suits lighter, or more experienced riders. Light and lively with plenty of room to “self-tweak”, the Hover 122 and 142 are the must-try foilboards for sailors of any skill level.

KEY FEATURES

  •     Bottom Tail Channel = Adds lift & minimizes pearling
  •     (2) 10” US Boxes = Quick and easy foil tuning
  •     Dihedral Nose In Deck = Buffers against side wind
  •     Short & Parallel Outline = Easy and stable uphaul
  •     Flat Rocker = Planes easily in light wind


Length 236 cm Width 77.5 cm
Length 229 cm Width 73 cm

LIFT
Foil Sail

The Lift is a lightweight sail developed specifically for foiling and perfectly matched to the early take-off and smooth flight of the Naish Thrust WS foil. Designed with low internal tension to maximize responsiveness at the bottom of the wind range, it delivers the low-end power to quickly get you up on the foil in light wind and yet still be luffable and effortless to handle once you are flying. The Lift planform is optimized for foiling, featuring extra foot area due to the more upright rig position and a relatively long boom.

Sizes: 5.7, 6.4
KEY FEATURES

  •     3 + 1 Battens = Very responsive + luffable
  •     Low Clew = Closing the gap instantly
  •     Medium Aspect Ratio = Great handling + wide range
  •     Soft Leading Edge = Makes the sail luffable

THRUST WINDSURF FOIL COMPLETE-STANDARD
All-around Freeride Foil
Mast Size: 70 cm |Aspect Ratio: 3.46 | Wingspan: 65 cm | Projected Surface Area: 1220 cm2

While forgiving for those just getting started, the Thrust Windsurf foil setup also offers boundless potential for those looking to advance their skills. 50% lighter than its 2018 counterpart, the 2019 delta shaped front wing creates lift at very low speeds and maintains stability through both for-and-aft as well as side-to-side movements. Compared to high aspect wing shapes, this delta is incredibly user-friendly and delivers earlier lift. Whether it’s blowing under 10 knots or if the wind is hitting the high 20s, this wing is ready for the ride. Conversely, in the same conditions, riders on high aspect wings are forced to switch to a smaller wing set, since their lightwind wing sets would no longer be controllable.

Easy jibing and other maneuvers are another advantage of the Thrust WS setup. The delta front wing works in tandem with the vertical stabilizer of the back wing to deliver easy control when turning. The front wing provides lift at low speeds making it much easier to cruise through a jibe without coming off the foil. While high aspect foils require the board to plane first, the Thrust WS setup engages the foil, lifting you up even when the board has not reached full planing.

The Thrust Windsurf foil setup offers the earliest foiling in the lightest winds, maximum control at any wind speed—in comparison to high aspect foils—and accessible maneuverability in jibes and tacks. Its unique design, not only welcomes new riders to the sport, it supports you through the journey as you advance your skill level.

View the Assembly Instructions HERE

The Hover Kite 130, 155, and 160 foilboards have a shallower track system and therefore require the shorter screws as supplied with the board. These boards CANNOT be used with the longer screws that come with the Naish Thrust foil.
When pairing all other Naish Hover Foilboards with your Naish Foil, use the screws supplied with the foil.  
Reference which screws to use HERE
WHAT'S NEW

  •     50% Lighter Wings
  •     Back Wing
  •     Monocoque Ultra Robust Back Wing Construction
  •     Heavy-duty Fuselage
  •     Standard Plate Connection
  •     Stealth Stripes

CONSTRUCTION

  •     Aircraft Grade High Precision CNC Cut Fuselage
  •     Aircraft Grade Extruded Aluminum Mast
 (All aluminum masts will receive a custom wet-sanded Speed Finish)
  •     Carbon/Glass PrePreg & Hi Mod Foam Core Front Wing Construction
  •     Carbon/Glass PrePreg & Hi Mod Foam Core Monocoque Back Wing Construction
  •     316 Marine Grade Stainless Steel Hardware

COMPLETE KIT INCLUDES

  •     Front Wing WS 1
  •     Back Wing WS 2
  •     70 cm Aluminum Mast BOARD MOUNT SOLD SEPARATELY
  •     Fuselage WS

  •     Foil Assembly Screw Set
  •     Standard Mount Plate
  •     Standard Plate Screw Set
  •     Foil Cover
Weiterführende Links zu "Naish Hoover Foil Package Ready to go!"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Naish Hoover Foil Package Ready to go!"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen