F-One Foil Gravity Carbon 1200

Fr. 1'521.00 * Fr. 1'690.00 * (10% gespart)

inkl. MwSt. zzgl. Versandkosten
ab 1000.- Bestellung portofreie Lieferung

Gerne bestellen wir diesen Artikel für Dich. Lieferzeit auf Anfrage.

Wing Grössen:

Foil Variante / Mast:

Carbon Mast Upgrade:

  • SW11914.8
GRAVITY CARBON 1200 FLY IN FULL CONTROL The foils of the Gravity line are designed to provide a... mehr
Produktinformationen "F-One Foil Gravity Carbon 1200"

GRAVITY CARBON 1200
FLY IN FULL CONTROL

The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential.

  •     Sharpest turns & carves
  •     Great stability in the turnst
  •     Perfect speed control
  •     Monobloc Carbon Construction

Area: 1245 cm²
Span: 70 cm
Aspect Ratio: 3.9
Weight: 1.42 kg (wing only)

A Gravity foil is an intuitive foil to use. It generates lift at low (and even very low) speed but does it a smooth way so you can keep your balanced easily. Originally designed for surfing, the wings are designed to be easy to roll and turn which also makes them ideal to cruise and carve with a kite.
The 1200 size is also considered to be a fantastic kitefoil wing. With a large area and a generous profile thickness, the Gravity 1200 gets you flying before you can even notice it. With total control over your speed, the Gravity is not only ideal to learn kitefoiling but it’s also great to send some sharp turns with full confidence. Choose a small kite and enjoy the secure lift and total maneuverability of the Gravity 1200 whether on flat water or in the waves.
Built using the Monobloc construction with pre-preg carbon, the foils are both very light and really strong. This set-up offers better load transmission and better stiffness throughout the different parts for maximum control. The Titan connection allows to plug both an aluminium or carbon mast and the fuselage is split in two parts to facilitate transportation.
The Gravity wings are recommended with the C275 surf stab. This stabilizer offers easy take-off and good directional stability for a secure feel. The constant curve arch makes it easier to roll the foil and engage in the turns at any speed. It will serve good when carving on the Gravity 1200.

TITAN CONNECTION
The TITAN connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions.
Its format is compact which is hydrodynamically friendly and very easy to use, assemble and disassemble.

PRE-PREG
With Pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process.
Quality control is much better and so is the working environment for the people building our foils. Pre-Preg fabrics offer the lightest weight with the best mechanical properties of carbon fiber.

MONOBLOC STRUCTURE

Having a stiff and solid assembly between all the parts of the foil, is key to making it perform at its best as well as easy to handle.
The connection of the front wing with the fuselage is highly stressed and loaded, it is one of the critical area of the assembly in terms of structures.
The MONOBLOC wings are molded together with the fuselage in one shot, thereby removing the connection and the chances for unwanted and parasitic movements.
The structural fibers of the fuselage are spread into the wing to achieve the most natural, sound and light connection.
It is also incredibly stiff and provide absolute control at all times, with the foil responding perfectly to all of the riders input.
When the overall dimensions are too large for convenient transportation, a connection is set into the fuselage, behind the mast where the loads are smaller.

 

  • GRAVITY CARBON 1200 Front wing

    The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential.

    Built using the Monobloc construction with pre-preg carbon, the foils are both very light and really strong. This set-up offers better load transmission and better stiffness throughout the different parts for maximum control. The Titan connection allows to plug both an aluminium or carbon mast and the fuselage is split in two parts to facilitate transportation.

    The Gravity wings are recommended with the C275 surf stab. This stabilizer offers easy take-off and good directional stability for a secure feel.

    • Area: 1245 cm²
    • Span: 70 mm
    • Aspect Ratio: 3.9
    • Weight: 1.42 kg
  • ALU MAST 45 > 95 cm

    The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.

    The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down.

    It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.

    The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).

    A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).

    Sizes recommended:

    • 45 > 95 KITEFOIL
    • 55 > 75 SURF / SUP FOIL
    • 65 > 75 WING FOIL
    • 75 > 85 WIND FOIL
  • CARBON MAST 75 > 105 cm

    A true masterpiece of composite craftmanship and design, the F-ONE Carbon Mast was designed to transform your foiling experience by a significant improvement of the glide and a dramatic weight reduction matched with impressive rigidity.

    Available in 75 cm, 85 cm and 105 cm, the F-ONE Carbon Mast is ready for all disciplines: surf, wing, kite, SUP. It features a 4-bolt plate at the top (hole spacing: 160×90mm) and an integrated Titan mast foot at the bottom. It can be connected to virtually all boards on the market featuring the twin track system and can receive all the wings and fuselage that feature the TITAN connection slot.

    Length: 75 cm / 85 cm / 105 cm
    Chord: 12 cm
    Profil Thickness: 1.45 cm
    Weight: 1.40 kg / 1.52 kg / 1.81 kg

    Recommendations:

    • 75 > 105 KITE FOIL
    • 75 SURF / SUP FOIL / WING FOIL
  • STAB C275 Surf

    The C275 SURF stab is specifically designed for carving and pumping. Its flatter arch shape delivers high efficiency while pumping in order to connect more waves. Its shape and smaller area ensure sharp turns and more speed with a very loose feeling, closer to that of a shortboard. It is a high-performance stab that suits the Phantom range.

    Built in Pre-Preg Carbon and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance.

    • Efficient pumping
    • Sharp turns
    • Loose-feeling
  • GRAVITY FOIL Equipment

    EVA COVER

Weiterführende Links zu "F-One Foil Gravity Carbon 1200"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "F-One Foil Gravity Carbon 1200"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen